01'LSwon

iTrader: (2)

I have a yank ss3600 and intake and the usuall but its time to replace those ticking lifters so i thought a cam while i have it apart. Could i get by with the TSP 228R 112LSA and not hurt the tranny at the track?

Kingc8r

iTrader: (21)

^ lol

To answer the question I think if you leave the line easy and don't beat on it constantly it will last a while....maybe

waterbug1999

iTrader: (3)

why go to the track if your going to baby it.. mine let go after two WOT hits on the hwy after my h/c build. Bought an FLT and been good to go.

01'LSwon

iTrader: (2)

Thanks for the input, i am sure a performabuilt or finnish line will be considered before the track.

NVR_SPDS

iTrader: (39)

It could last one pass, it could last 200, you never really know until it blows.. Im hoping you have a good cooler with that stall?

MUSTANGBRKR02

iTrader: (91)

The killer of these transmissions is heat. A good cooler is needed. Also WOT downshifts are also very hard on transmissions. I went thru two 60's and now I have a 80 but that one is coming out for a built unit.

fastfox

If you plan on makeing power the 4l60e is trash.I did the th350 swap in my fbody.

Longshot LCMS

iTrader: (1)

Sweet mother of god... That has to be the worst catastrophic failure pic I've ever seen.

01'LSwon

iTrader: (2)

oh i always keep it cool with the B&M 24000 or whatever it is. No WOT kickdowns for me. Plus i have some extremely dangerous sumitomo 315's in the back so it never bites on the street. My shift points are set at 6200 and not to exceed. Convertor doesnt lock until 60 after OD has engaged. The guy at boost really knows how to set these things up. My bro in law just dyno'd his car on wheel dyno.
303 unlocked in 3rd
344 locked
ss4000 yank
stock cam just intake and exhaust
so we def like our tuner.

chrs1313

iTrader: (24)

10.60s here and the old man has gone 10.40s on stock trans... key is keeping the heat out...

LS1nut377

iTrader: (16)

yup i agree! im gonna as fast as i can on the stock trans!

SOMbitch

iTrader: (8)

They don't like high shift points either so 6200 is good...

meine96ws6

iTrader: (4)

mine blew on a hard down wot downshift.. have since rebuilt it tho.. and its been great..

got-a-ls1

iTrader: (12)

who has removed torque management in here that is complaining about blowing their trans on WOT downshift?

Azrael

iTrader: (10)

10.4 @ 130 when we pulled it for a built transmission. Our stocker went to another car running bottom tens and don't know what happened to it after that.

mikefirehawk0623

iTrader: (8)

i have had a stock tranny for 5000 miles and like 45 track pass and its fine for me and it has yank 4000ss and B&M 24000 tranny co0ler but it time for a six seed