Orangemagic

iTrader: (2)

I have a 2000 trans am with a built 4l60e trans in it. I'm running 11.5 to 1 compression. I'm running a ms4 cam revin to 6800-7000rpm. My plan is to run nitrous in the near future. Probably a 150 or so . I did have a circle d4c in my stock trans am and performed well now i'm just wondering if the 4c will work with nitrous or do i need to look for somethin different. Thanks

Sy99T/A

iTrader: (34)

I dont know about the Circle-D nitrous stall limits but Yank max stall speed is 3600 for nitrous application

dnkynrbk

iTrader: (34)

3500 to 3600 for nitrous applications on a 4l60e.

conde'strans

iTrader: (8)

That will depend on what gears and how tall of a tire you run. A 4000 stall could go with 4.10s while a 3600 stall would go with 373s. I'd say contact Circle D and ask them about your specific setup see what they say! Gears, stalls, and how tall of a tire are all factors when spraying. You gotta have the correct combo for it to work best!

HitmanLS1

iTrader: (16)

You should be fine. I talked to Chris about this with a setup I had in mind.

krissoto

iTrader: (3)

If your gonna spray it, you might wanna anti ballooning plate. Other than that maybe a tranny cooler, if you don't already have one.

JonCR96Z

iTrader: (33)

A 150 shot isn't enough to worry about stall speed on the nitrous. You should get a 4000+ if you want the most out of it.