4L60E to Turbo 400 swap
#1
4L60E to Turbo 400 swap
Hello Boards;
Ok here's what I have.
I am swapping out a 5.3/4L60E to a LS2 with a Turbo 400. Vehicle is a 2005 Chevy Silverado, and application is off road specific so need for concern in the 4L60E, it's just not going to happen. Besides the 400 is built and ready to go.
My question is straight forward, what is involved in taking care of the electronics side of things, mainly the ECM, speed sensor, etc.
I am looking for detailed specifics, links to needed items, etc. Basically the in's and out's to making this happen.
If anyone has done this swap successfully and can help me out I would appriciate it very much.
I did try searching on this site and found some info, but nothing specific.
Thanks
SRP1
Ok here's what I have.
I am swapping out a 5.3/4L60E to a LS2 with a Turbo 400. Vehicle is a 2005 Chevy Silverado, and application is off road specific so need for concern in the 4L60E, it's just not going to happen. Besides the 400 is built and ready to go.
My question is straight forward, what is involved in taking care of the electronics side of things, mainly the ECM, speed sensor, etc.
I am looking for detailed specifics, links to needed items, etc. Basically the in's and out's to making this happen.
If anyone has done this swap successfully and can help me out I would appriciate it very much.
I did try searching on this site and found some info, but nothing specific.
Thanks
SRP1
#2
Thanks Bro Inc for the heads up.
If you happen to have a link to one of the more resourceful threads on this site I would appriciate it.
In the mean time I'll do some more searching.
Thanks again
SRP1
If you happen to have a link to one of the more resourceful threads on this site I would appriciate it.
In the mean time I'll do some more searching.
Thanks again
SRP1