You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
I have a chetah manual valve body I am installing in my th400. The directions say to pull the seals off of the inner piston and re use the spring. My spring is broken. and i cant get a hold of one today and want to finish my trans. so a few questions.
1. if I pull the seals off of the inner piston on the rear servo then that should mean the band is not going to apply anyway. and if that is the case then the only purpose of the spring is to keep the pin up off of the band. Am I correct or will that piston still work some how.
Thanks for any help.
__________________ 1999 SS w/ L92 408 Best ET 10.70@126 NA 2007 Silverado NNBS cam and n2o 4.8 Best ET 12.64@104.9 SOLD 2004 CTS-V cam and headers
th400 Rear servo spring and manual valve body ? 
