guys with stalls... whats ur 60ft
Trending Topics
#8
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 79 Likes
on
70 Posts
Dead hook with an Edge 3200 was 1.69, 1.70, and a 1.72. My car has no where near the work/parts to hook a SS4k, its eats drag radials for breakfast.
Edit, this set-up was full weight, 370 whp with a cam only.
Edit, this set-up was full weight, 370 whp with a cam only.
Last edited by 01ssreda4; 02-07-2011 at 12:33 PM.
#11
TECH Senior Member
iTrader: (71)
1.49-1.52 depending on how I'm hooking..2200+ DA full weight 370rwhp.. ptc 4000
1.55-1.65 spinning my *** off..2500+ DA 3250rweight 415ish rwhp.. vig 4000-4400.. stock suspension so would life tires about a foot and then unload suspension causing me to spin. Before heads and all the weight reduction I cut mid 1.5s hooking.
You need to be paying attention to power levels, weight of car, and DA if you are trying to get accurate info.
1.55-1.65 spinning my *** off..2500+ DA 3250rweight 415ish rwhp.. vig 4000-4400.. stock suspension so would life tires about a foot and then unload suspension causing me to spin. Before heads and all the weight reduction I cut mid 1.5s hooking.
You need to be paying attention to power levels, weight of car, and DA if you are trying to get accurate info.
#15
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 79 Likes
on
70 Posts