SiezeTheMoment

iTrader: (2)

I know this has been documented many times, but here is the results.

Lid, Catback, p&p throttle body, underdrive pulley, and drag radials:

60' 2.1
1/8 8.8
MPH 86.4

I ran this around 10 times and couldn't do any better at 3 different tracks, there was no spin at all.

Added Yank 3600, and tune (with tranny cooler):

60' 1.8
1/8 8.2
MPH 84.7

There was still some spin on this run. I got progressively better through my three runs that night. As I got more expierence on how to launch and my tires got warmer(hot lapped) my times got lower.

heymoej

iTrader: (67)

how were you launching it?

off the brake....

just stabbing the gas...

or?

SiezeTheMoment

iTrader: (2)

I had the best results from just punching it off of idle. I couldn't get any traction by brake stalling it

heymoej

iTrader: (67)

ahhhh.....

how much air did you have in the drag radials & what make are they?

silverz28camaro

iTrader: (20)

i'm surprised you lost mph, but since you don't have headers it might make sence. Get headers and I wouldn't be surprised if you see another .2 and 3 mph...

SiezeTheMoment

iTrader: (2)

18 pounds in bfg drag radials.

senicalj4579

iTrader: (41)

Alot of people do loss mph. Even my tuner said I would lose mph. But I guess I was the lucky one gaining 2mph and .6 in the 1/4 with the ss3600

SiezeTheMoment

iTrader: (2)

senicalj, what was your 1/8 times and mph on your 12.0 run?

senicalj4579

iTrader: (41)

Heres full weight car -1200 da ...https://ls1tech.com/forums/12-second...my-ss3600.html

Heres after the weight reduction +500 da ...https://ls1tech.com/forums/12-second...on-12-0xx.html

I ran the same 1/4 times but look at the da. I probably gained .2 or so after weight reduction.