TCI 3800 Props to Kevin winstead (TCI)
03-11-2004, 10:36 AM
#1
TECH Fanatic
Thread Starter
TCI 3800 Props to Kevin winstead (TCI) Well just to let people know , I just installed a TCI 3800 I received from Kevin in a converter swap. All I can say is that the converter is great, very easy to drive around town with and when the time comes to hammering it look out this converter is sweet , stays right in the power slot . I love it , just wish i did it sooner, AS ALWAYS THANKS KEVIN your a great guy to talk to and went the extra distance for me, I Will post some times when I get to the track hoping in april when all the snow is gone.
Last edited by boomcase; 03-11-2004 at 10:46 AM.
03-11-2004, 10:51 AM
#3
TECH Fanatic
Thread Starter
W/2800 and some horsepower loss issues it went 12.18 at 111mph with a 1.70 60ft. 
Lost 17 rwhp due to something dont know what but I installed new valvesprings/pushrods/ls6intake/ B&M transpack/ and converter hoping one of these helps it out. DId compression check and everything was at 175psi, so after a new dyno tune (soon) I will take it out to the track.
Hoping to see 11s
Lost 17 rwhp due to something dont know what but I installed new valvesprings/pushrods/ls6intake/ B&M transpack/ and converter hoping one of these helps it out. DId compression check and everything was at 175psi, so after a new dyno tune (soon) I will take it out to the track.
Hoping to see 11s
03-11-2004, 05:37 PM
#5
TECH Fanatic
Join Date: Jun 2002
Location: Indianapolis
Posts: 1,227
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by boomcase
W/2800 and some horsepower loss issues it went 12.18 at 111mph with a 1.70 60ft.
Lost 17 rwhp due to something dont know what but I installed new valvesprings/pushrods/ls6intake/ B&M transpack/ and converter hoping one of these helps it out. DId compression check and everything was at 175psi, so after a new dyno tune (soon) I will take it out to the track.
Hoping to see 11s
Lost 17 rwhp due to something dont know what but I installed new valvesprings/pushrods/ls6intake/ B&M transpack/ and converter hoping one of these helps it out. DId compression check and everything was at 175psi, so after a new dyno tune (soon) I will take it out to the track.
Hoping to see 11s
Thanks Tony
03-11-2004, 05:52 PM
#6
Originally Posted by boomcase
W/2800 and some horsepower loss issues it went 12.18 at 111mph with a 1.70 60ft.
Lost 17 rwhp due to something dont know what but I installed new valvesprings/pushrods/ls6intake/ B&M transpack/ and converter hoping one of these helps it out. DId compression check and everything was at 175psi, so after a new dyno tune (soon) I will take it out to the track.
Hoping to see 11s
Lost 17 rwhp due to something dont know what but I installed new valvesprings/pushrods/ls6intake/ B&M transpack/ and converter hoping one of these helps it out. DId compression check and everything was at 175psi, so after a new dyno tune (soon) I will take it out to the track.
Hoping to see 11s
Dave
03-12-2004, 05:51 AM
#7
TECH Fanatic
Thread Starter
Yea i have had the 2800 converter for like 3 years now and in 2 different years, it has done well and put some decent times down , No complaints about it.
Well from what i see on our accurate tachs (HAHAHAH/LOL)it looks to be around 4800/4900 2nd and about the same in 3rd. Really hard to tell like that though.
Well from what i see on our accurate tachs (HAHAHAH/LOL)it looks to be around 4800/4900 2nd and about the same in 3rd. Really hard to tell like that though.
Last edited by boomcase; 03-12-2004 at 08:35 AM.
Trending Topics
03-14-2004, 09:58 AM
#9
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
I run that converter and love it. best 60' is a 1.68 on drag radials with no suspension mods. I know the car has more in it.
that converter works look at my sig.
that converter works look at my sig.