TXZ28LS1

iTrader: (5)

If this is in the wrong section, mods feel free to move it..


But i am looking into slapping a 150 shot on my 02 Fbody.. I am running a circle D 5C which is a 4000-4200 stall. Just wondering if anybody is spraying 150 shot with a big stall....Will it work fine or not? I wont be running at the track or anything every weekend.

Justins00ss

iTrader: (18)

Granted mine is in a th350 but I run a 150 on my Fti 4200 with no problems. That's what mine was built for. As long as your converter has ballooning plates you should be good to go. Hopefully your tranny will hold it.

Circle-D

iTrader: (21)

Do you have any data from the track. What RPM do you shift to 3rd at and what does it fall back to?

Chris

Fbodyjunkie06

iTrader: (10)

Wondering the same thing as I have a 5c converter also, but mine is a 5k stall. I'd like a 100-150 shot to give it a little needed kick in the ***.

Edit: Mine is not a 5c but the 230mm billet converter.

TXZ28LS1

iTrader: (5)

Hey Chris,

No data from the track. Car is just a fun street car/daily driver. I am glad i went with the 5C over the "E" since i will be spraying.. But geez, you could have warned with how i would have no traction..LOL.

gregrob

iTrader: (8)

Chris I can get you a datalog next time I work on his tune. I tuned it for the stall but didnt work on the engine paramaters.

We're going to brush up on the MTI tune that's in there and I can make some datalogs of the shift extension, etc.