Doing a TH350 swap into my LS1/4L60E swapped 96Z28. Tried searching for the measurements for driveshaft that will fit a TH350 short tailshaft to a stock 10 bolt.
I know Spohn makes a ready to drop in driveshaft but I've heard of fitment issues. Been looking into Denny's 3" 1330 series or PST 3" 4130 series but need correct measurements and I don't have time to do the swap, measure and wait to have the driveshaft made since I'll be borrowing a friends backyard for the swap.
Any help is greatly appreciated.
Also any suggestions on my swap? I have a TH350 6" tailshaft I believe, Hughes Flexplate and spacer, modified BMR crossmember, Lokar 36" Dipstick. I believe the trans already has the VSS and gear installed since the trans came out of a LS1 F-Body. How would I check?
2000 Camaro SS M6 SLP #4179
**PHK** Click the sig pic to find out more about PHK