4l60e bellhousing bolt question
04-28-2012, 05:46 PM
#1
Teching In
Thread Starter
Join Date: Jan 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
4l60e bellhousing bolt question So I searched and searched and cant seem to find anything on my current problem.
Im in the process of putting the transmission back in and I have one bolt that is longer than the rest. I dont remember where it goes. I figured the top one, but I have it in as far as it will go and its still sticking out. Where does it go? I forgot to make a note of it. Help?
Im in the process of putting the transmission back in and I have one bolt that is longer than the rest. I dont remember where it goes. I figured the top one, but I have it in as far as it will go and its still sticking out. Where does it go? I forgot to make a note of it. Help?
05-01-2012, 04:24 PM
#2
Moderator
What kind of engine are you connecting your 4L60E to?
On an LS engine, you use 8 40mm long bolts. The bell housing has 9 holes, but only eight are used. With an LS engine, you have at bolt at the top (but not at the 1 O'Clock position).
On an LS engine, you use 8 40mm long bolts. The bell housing has 9 holes, but only eight are used. With an LS engine, you have at bolt at the top (but not at the 1 O'Clock position).
