Monte4ever

iTrader: (2)

The title says it all. I'm trying to figure out how to get my 4l80 to stay in second gear when I select it in order to do a burnout at the track.I have Hptuners and don't see anything for that purpose. There's got to be a way cause I see it done constantly. Thanx in advance.

Monte4ever

iTrader: (2)

And yes, I'm totally new to this tuning stuff.

floman

iTrader: (54)

I just manually shift my down to 1st and start burnout and then manually shift up to 2nd and hold there through the burnout. Works on my 98 Camaro. Put it in D when you roll up to the line to stage.

got-a-ls1

iTrader: (12)

its in there. under general transmission tab. upshift d2 2nd upshift d2 3rd.. etc.

got-a-ls1

iTrader: (12)

if you have a 98 or a 99 i do not believe the option is there however

Jake's Performance

iTrader: (2)

It's OK to start in first, but you want to get into 2nd asap and at as light throttle/low tire speed as possible. WOT 1-2 shifts while spinning can cause sprag failure.

Blackbird-WS6

iTrader: (15)

Whats the best way to go about then?? What do you recommend

Jake's Performance

iTrader: (2)

Exactly as I stated above.

Blackbird-WS6

iTrader: (15)

Ok thanks. Just wanted to make sure.

Monte4ever

iTrader: (2)

I was looking at that. IIRC, my D2 is set high (300+). I guess that's to hold it in 2nd. I'm at work so I'm not sure of the numbers.. Thanx.

01ssreda4

iTrader: (96)

In regards to HPTuners you can do it with the scanner in real time if you have the laptop in the car.

Monte4ever

iTrader: (2)

Do what?