greenvortec97

iTrader: (1)

Any luck with the sweet performance fittings? my 60e has AN fittings, from what I understand, They would have worked if my 80e was before a 97 year model. Mine is an 02 so It has the longer fitting closest to the tail shaft pictured below


I would really love to keep my SS cooler lines with AN fittings. So, Does anyone here run the sweet performance fittings? They seem pretty cheap

Cole Train

iTrader: (30)

I went with some 90* ones I got from an eBay seller. They have a nut that you use to tighten them instead of turning the whole fitting but they were $65.

greenvortec97

iTrader: (1)

the 60e in my car right now has AN straights and then on the SS hose I have 90's so I believe I'd be okay with just these.. any idea what material your fittings are made out of? Do they have O rings?

luigiandme

iTrader: (2)

I've used the ones shown above with great luck. Also used the 90 ones. Both work great!

Cole Train

iTrader: (30)

These are the ones i have and yes with 90*s coming off the hose you'll be fine

forcd ind

iTrader: (7)

I used these on my 80E, low profile and work good

oldngray

iTrader: (9)

I just purchased a couple like the short one from my hydraulics supplier yesterday, but cost much less than the $65, more like $4 apiece, made of steel, not stainless

forcd ind

iTrader: (7)

they are the wrong thread, the 80E uses straight thread, the hyd stores sell 1/4 NPT, tapered threads
the guy on ebay threads them with the 1/4-18 straight

White.Lightning

iTrader: (53)

I searched eBay with no luck. Care to PM me the seller name for these?

Cole Train

iTrader: (30)

Sure give me a bit and I'll PM you a link

LongIsland63SS409

iTrader: (22)

EBAY link

http://www.ebay.com/itm/4L80-4L80E-4L85-4L85E-fittings-/151222185618?pt=Motors_Car_Truck_Parts_Accessories&hash=item23358b6e92&vxp=mtr

Mike

White.Lightning

iTrader: (53)

Thanks for the link