HISS

iTrader: (52)

Ok I'm thinking this is just related to slip and if I clear the code it will remedy it. Anyone else have this issue?

mrvedit

About the only thing 1st and 4th have in common is Solenoid A. If you are getting a code, scan it to see if it is solenoid related. Perhaps a pin got bent or a wire broken on the trans connector. Just a guess at this point.

Or maybe you are in limp mode - just 3rd gear.

HISS

iTrader: (52)

I don't think it was a pin or connector issue. The trans shifted fine for 100 or so miles. I've heard with a loose converter this has happened to a few people. It is in limp mode, stays in third but will go into second manually.

01ssreda4

iTrader: (96)

Its very common, you need to scan the specific code your getting then change the DTC to no error reported, done.

HISS

iTrader: (52)

Thank you sir^

Circle-D

iTrader: (21)

Glad you got it figured out. What code was it?

Chris

HISS

iTrader: (52)

Shift solenoid a. Thanks for your help as well Chris.