02 WS6 Yank 3600 Install Help
#1
Teching In
Thread Starter
Join Date: Jul 2012
Location: Spring TX
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
02 WS6 Yank 3600 Install Help
Hey Guys
Just ordered a Yank SS3600 for my bird. It will be my first time installing one of these so if you guys have any install instructions it would be a big help! Or if you guys have any links to some good instructions I would appreciate it!!!
Just ordered a Yank SS3600 for my bird. It will be my first time installing one of these so if you guys have any install instructions it would be a big help! Or if you guys have any links to some good instructions I would appreciate it!!!
#2
TECH Junkie
iTrader: (104)
There are many useful pages on BowlingSS website, ...
http://www.bowlingss.com/Mods/Instal...%20Fbodies.mht
http://www.bowlingss.com/LS1_How_To.htm
This is also helpful, ...
http://www.ls1howto.com/index.php?category=0
http://www.bowlingss.com/Mods/Instal...%20Fbodies.mht
http://www.bowlingss.com/LS1_How_To.htm
This is also helpful, ...
http://www.ls1howto.com/index.php?category=0
#3
Teching In
Thread Starter
Join Date: Jul 2012
Location: Spring TX
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
There are many useful pages on BowlingSS website, ...
http://www.bowlingss.com/Mods/Instal...%20Fbodies.mht
http://www.bowlingss.com/LS1_How_To.htm
This is also helpful, ...
http://www.ls1howto.com/index.php?category=0
http://www.bowlingss.com/Mods/Instal...%20Fbodies.mht
http://www.bowlingss.com/LS1_How_To.htm
This is also helpful, ...
http://www.ls1howto.com/index.php?category=0
#4
10 Second Club
iTrader: (16)
Make sure you don't install convertor dry and with the convertor pushed all the way in the trans when you Mate it to the back of the block, make sure you have around 1/8" clearance inbetween the convertor mounting pad and flex plate BEFORE you bolt convertor up to the flex plate.