No possible way to fit a 6l80e or 6l90e (GM A6) into an f-body huh?
#1
TECH Apprentice
Thread Starter
iTrader: (8)
Join Date: May 2007
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
No possible way to fit a 6l80e or 6l90e (GM A6) into an f-body huh?
Interested in putting a stray 6L80e we have into my 99 trans am. (Please skip all the why?, and the 4L80 are stronger comments) However, as far as I can tell there is no standalone system, and not even a manual valve body. Can anyone think of a way to make this happen?
#3
Moderator
The TCM built into the 6L80E is designed to talk to the other computers (ECM, Body control, dash, etc) over the CAN bus. Your '99 is too old have support the CAN bus. It would be a crazy complex project and you might fry a few transmission along the way.
And here is an informative previous thread on the subject:
https://ls1tech.com/forums/automatic...r-6l80e-2.html
And here is an informative previous thread on the subject:
https://ls1tech.com/forums/automatic...r-6l80e-2.html
Last edited by mrvedit; 04-29-2016 at 08:46 PM.