TH350 swap
01-27-2005, 11:39 AM
#1
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Nov 2003
Location: San Antonio, TX
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
TH350 swap I have been searching the threads and I know I saw it once, but I have figured out the stall converter-flywheel issue from LS1 motor back to TH350, I have figured out the torque arm mount and tranny brace fabrication.
I NEED anyone to chime in on the parts/modules needed from GM to trick my computer into thinking it still has an electronic trans instead of the vacuum controlled TH350. I believe I saw in a thread there were three GM part numbers, or a kit I could buy somewhere with all of them. anyone know where I can get these parts?
James Coker
I NEED anyone to chime in on the parts/modules needed from GM to trick my computer into thinking it still has an electronic trans instead of the vacuum controlled TH350. I believe I saw in a thread there were three GM part numbers, or a kit I could buy somewhere with all of them. anyone know where I can get these parts?
James Coker
01-29-2005, 09:49 AM
#3
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Nov 2003
Location: San Antonio, TX
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
well.... century transmissions is now building me a new tailshaft with the mechanical gizmo in the there to null out the old electronic sender.
anyone going to chime in on this or am I the first to swap to a 350? <kidding>
anyone going to chime in on this or am I the first to swap to a 350? <kidding>
