Detroitmuscle

iTrader: (16)

Well I just got my Fuddle Racing 3500 installed the other day with a Trans-Go shift Kit and Tranny Cooler. Wow! The car is still very streetable and I drive it Daily and have no problems, except for a loss in a couple mpg. I can rip the tires up all the way up through half of second gear and the shifts are nice and fast due to the shift kit. The converter puts the car right in its sweet spot and the dead spot from 30-40 is virtually non-exsistant. I absolutly love this converter and would recommend it to anyone. If you don't have a nice stall on your auto, GET ONE!

ponyeater01LS1

i got my 3600 installed last weekend and yes its sweet to roast the tires through first and second and to chirp 3rd gear wow awsome TC awsome company .

FoxTa

what str did you get? i just ordered a 3600 with a 2.4 str.

Detroitmuscle

iTrader: (16)

I have a 2.1 str.

00formLs1

i just got mine installed yesterday and i love it, mines a 3500stall with a 2.0 str.
only prob was after the install my low oil light came on. i checked the oil and tranny fluid and both were good. is there a sensor that could have been diconected in the install? i don't have a shift kit yet but i rode in a car that had one and i love it.

SLPSS01

iTrader: (6)

just got mine yesterday, 3400/2.1
I'll be heading over to my buddy's house to use his lift.
Can't wait.

SSCam99

I'm glad to hear so much positive about Fuddle torque converters. I just got one (3400/2.1) and I can't wait to put it on!

spec_j

iTrader: (3)

i am getting my car back tomorrow. I got the 4000 with the 2.5 str....hehehe its going to be sweet as hell. Glad to heat that your TC from fuddle worked out for you, as it has for everyone else so far.

CrabhartLS1

what rear end gears do you guys have? I've heard a 3000 stall would work well with 3.42s, and i'd probably be going fuddle for that.

Also, what str would you recommend for the above setup?

SLPSS01

iTrader: (6)

I've got 3.23 gears, went with the 3400 stall 2.1 str John recommended.
Email him or PM him with your setup and he will make sure you get the right converter for your car.

eric01ss

iTrader: (13)

i will be getting one from john as well probably be getting a 3600-3800 stall with a 2.5 str since i will be putting the MS3 cam in my car

JasonK94Z

I just got mine delivered yesterday! I can't wait to get my transmission back from Cahall so I can put this thing in.

My box had "Howards Torque Converters" printed on it Anyone elses box have that?
Also, apparantely they double box the converters now, and use lots of newspaper too! So no more shipping damage.

flyinZ

iTrader: (15)

Ya, thats just the boxes that he uses, its ok.

I have a 3800/2.1, and it pulls like a *****! Im lovin' it.

SLPSS01

iTrader: (6)

Yes, :
https://ls1tech.com/forums/showthrea...5&page=2&pp=20

Detroitmuscle

iTrader: (16)

Yeah I wouldn't worry about the box it was shipped it. I have 3:23 gears and don't really plan on changing them anytime soon, especially after the stall.

spec_j

iTrader: (3)

im running the stock 3.23's on a 4000 TC with a 2.5 str. Going to ge the car right now i will let you know how i like it

CrabhartLS1

please do! I'd love to see some track times too when you get around to it.

Mr. Trick

iTrader: (19)

What is str?

SLPSS01

iTrader: (6)

stall tq. ratio
http://www.fuddleracing.com/wst_page4.html

71camaro

iTrader: (8)

Im currently in the market for a converter prob a 3500-3600. I was looking at the site and the prices vary from the street converters to the race ones. I was wondering which did u guys get, street or race ones? thanks