won't shift into 3rd gear at wot or
10-31-2005, 07:29 AM
#1
10 Second Club
Thread Starter
iTrader: (8)
won't shift into 3rd gear at wot or or heavy part throttle unless I let off the gas completely. The 4l60 has a shift kit and and a 3200 stall. I have removed all tq and adjusted part throttle shifts. Everything else seems to working fine. Any Ideas? Thanks
10-31-2005, 08:04 AM
#3
10 Second Club
Thread Starter
iTrader: (8)
Thanks for the tip. I have recently bumped up line pressures quite a bit via efilive and that helped with the heavy part throttle. It will now shift up to about 75% throttle. I think it must need more line pressure. Anyone ever modify their force current motor settings. What is a good temperature for the trans fluid?
Last edited by HioSSilver; 10-31-2005 at 08:15 AM.
11-01-2005, 02:53 AM
#6
Restricted User
Join Date: Apr 2004
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
If you installed the Trans-Go Shift kit "as is", then you will need to change the feed hole size for the 2-3 shift. I would change the feed size to .155" - .187". I do this to all of the "modified" Performance Shifts that I sell and install. Call me & I will give you the feed hole sizes you need to do this right. Just have your Shift kit instructions when you call. If the transmission is in decent shape, these modifications should solve this. Call 909 7951876 anytime past 12 noon PST.
Trending Topics
11-02-2005, 12:06 AM
#8
Originally Posted by Pro Built Automatics
If you installed the Trans-Go Shift kit "as is", then you will need to change the feed hole size for the 2-3 shift. I would change the feed size to .155" - .187". I do this to all of the "modified" Performance Shifts that I sell and install. Call me & I will give you the feed hole sizes you need to do this right. Just have your Shift kit instructions when you call. If the transmission is in decent shape, these modifications should solve this. Call 909 7951876 anytime past 12 noon PST.
11-02-2005, 12:16 AM
#10
12 Second Club
Join Date: Jun 2004
Location: Brazoria
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
mine did that to when i was using a HPP3 when it asks you if you have installed a shift kit and you have answer no. I kept answering yes and was experiencing the same problems you speak of.
11-02-2005, 08:47 PM
#11
Staging Lane
Join Date: Jul 2004
Location: Alabama
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
I was or am having a problem with my trans locking in 3rd. Contacted PCI-vig and they feel the cpu is picking up misfires from new cam. Havent had time to check yet but will be getting with my tuner soon.
