Excalibur

I have a 01 SS. Looking at getting a stall. It'll be mainly on the street but not a daily driver. I'm keeping stock cam and maybe stock 3.23s(might go 3.73s later) but i'm getting heads and full bolts on with 315-35-17 555Rs. About what size and STR would best fit my application? Also, where would be the best place to purchase one? Thanks so much for any advice/help.

Bharnz

The SEARCH FEATURE can be of great interest, use it
After much research and reading, and searching I chose FUDDLE

Captain InsaneO

iTrader: (38)

I called Yank and told them my mods. They suggested the SS4000, basically what I am saying is... I suggest calling some of the manufacturers for advice.

BlackHawk T/A

iTrader: (3)

Just my opinion, but I would get a cam before heads anyday...what you get for the $ is not very good if you just get new heads.

With that said, with the stock cam I would say SS3600, moderate cam SS3800, and big cam SS4000...

4mula

tci superstreetfighter 3500

LiquidFire350

iTrader: (8)

if i remember right, there was a lot of good TC info in this thread
https://ls1tech.com/forums/automatic-transmission/439434-how-big-should-i-go.html