composite x shifter
07-01-2006, 11:07 PM
#1
Teching In
Thread Starter
Join Date: Mar 2006
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
composite x shifter will a B&M composite x shifter work on a 4L60E tranny? are the 700r4 and 4L60E trannys almost the same? the composite X shifter is for TH400 350 700r4 etc. but not the 4L60e and I was just wondering if it would work
07-02-2006, 12:31 AM
#2
TECH Fanatic
iTrader: (2)
Join Date: Jan 2004
Location: Ewing, NJ
Posts: 1,222
Likes: 0
Received 0 Likes
on
0 Posts
it would be able to select the gears since the 4l60e is a 4spd auto, just like the 700r4. ti would not change the way the car shifts since the 4l60e is controlled completely electronically.
07-02-2006, 12:59 AM
#3
Which Composite X shifter are you specifically inquiring about? 
They all have optional models that can be used on 4spd GM transmissions. Although they will not directly bolt in. They are universal models for custom installations.
They all have optional models that can be used on 4spd GM transmissions. Although they will not directly bolt in. They are universal models for custom installations. 
07-02-2006, 11:10 PM
#7
TECH Resident
iTrader: (1)
Join Date: Apr 2006
Location: OMG I'm in Kansas
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
I am not that familiar with the composite X shifters but I think they make one like the Pro Stick but with a pistol grip, and if they do and you can change the gate plates on them then they will work with a 4 speed auto.
If its setup for a TH400 then it won't work with a 4 speed tranny unless it has the capability to swap gate plates.
I run a B&M Pro Stick and you can swap the gate plates out to control a 4 speed auto or a forward TH350/TH400 or what I have in mine which is a Reverse Manual TH400.
You can make a 3 speed gate plate work with a 4 speed auto but 1st gear will be non selectable, I ran my old 60E with my Pro Stick and a TH350 forward gate plate for awhile before I installed the TH400.
If its setup for a TH400 then it won't work with a 4 speed tranny unless it has the capability to swap gate plates.
I run a B&M Pro Stick and you can swap the gate plates out to control a 4 speed auto or a forward TH350/TH400 or what I have in mine which is a Reverse Manual TH400.
You can make a 3 speed gate plate work with a 4 speed auto but 1st gear will be non selectable, I ran my old 60E with my Pro Stick and a TH350 forward gate plate for awhile before I installed the TH400.
Trending Topics
07-04-2006, 02:08 AM
#11
TECH Resident
iTrader: (1)
Join Date: Apr 2006
Location: OMG I'm in Kansas
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 94z28L
sweet thanks, you dont happen to have any pics of this set up do you? sounds awesome
