trans shift hard?
10-05-2006, 06:16 PM
#1
TECH Resident
Thread Starter
trans shift hard? my tranny started to shift hard on me the other day.
before the other day, the shifts where crisp not hard.
its a built tranny with a 4K stall.
but now the shifts are hard.
before the other day, the shifts where crisp not hard.
its a built tranny with a 4K stall.
but now the shifts are hard.
10-06-2006, 07:56 AM
#4
The Tranny sudenly hitting unussually hard could be several things , from a slipping converter clutch causing 1870 code and high line to a pcs solinod stuck restricted or unhooked though the latter should set a code .
www.performabuilttransmissions.com
www.performabuilttransmissions.com
10-06-2006, 11:25 AM
#6
Launching!
Join Date: May 2003
Location: Canadian West Coast
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by performabuilt
The Tranny sudenly hitting unussually hard could be several things , from a slipping converter clutch causing 1870 code and high line to a pcs solinod stuck restricted or unhooked though the latter should set a code .
www.performabuilttransmissions.com
www.performabuilttransmissions.com
10-06-2006, 08:34 PM
#7
TECH Addict
iTrader: (3)
Join Date: Nov 2005
Location: Lincoln, NE
Posts: 2,869
Likes: 0
Received 0 Likes
on
0 Posts
What if yours does this on the 2-3 shift (part throttle), but you are vacuum modulated? The PCM has no control over line pressure and otherwise the transmission acts normal. It "hits" hard unlike the other gears which still shift nice. The same gear shifts fine at WOT.
