tailshaft question about angle.
10-05-2006, 10:36 PM
#1
tailshaft question about angle. im trying to set pinion angle. So when my car is sitting on the ground, i want the trans tailshaft to be level with the ground, at 0 deg.? But now when i put in poly motor and trans mount, and with my 28'' tires in the rear, skinnies etc. etc. My motor / tranny, everything is tilted down in the front. Making my trans tilted down in the front. Do i need to to correct the angle of everything to be level with the car? Or is it alright for the angle to be a little off. With the car on the ground, the motor/trans is like 10deg. tilted forward (down in the front). All this crap is giving me a headach!!!
