th350/400 guys
12-29-2006, 02:21 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (49)
Join Date: Dec 2005
Location: ms
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
th350/400 guys you may have seen me posting in the th350/400 AND in the built 4L60E threads; thats because im undecided on which im gonna settle with. anyway my question is: i've notice that the th350/400 converters have straight thru mounting holes rather than tapped out like my yank. so what bolts/nuts are you all using to mount the converter to the flexplate and where are y'all getting them?
also, where can i find the speed sensor and rotor? and how do i go about mounting it?
thanks,
brent
also, where can i find the speed sensor and rotor? and how do i go about mounting it?
thanks,
brent
12-30-2006, 10:56 AM
#2
10 Second Club
iTrader: (10)
Join Date: Dec 2001
Location: Earth
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Depends on where you buy the converter from. My converter has tapped out holes.
I purchased my speed sensor from E-Bay for $20 and the rotor(reluctor ring), from GM Parts direct. I think the PN are 8655291 for the sensor and 8655315 for the rotor. Just double check on the numbers.
I purchased my speed sensor from E-Bay for $20 and the rotor(reluctor ring), from GM Parts direct. I think the PN are 8655291 for the sensor and 8655315 for the rotor. Just double check on the numbers.
12-30-2006, 03:31 PM
#3
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
You also need the right tail shaft to adopt the SS right?
I have a Neal Chance TC and it came with threaded holes. It used some big bolts like 7/16-20 threads I believe.
Dan
I have a Neal Chance TC and it came with threaded holes. It used some big bolts like 7/16-20 threads I believe.
Dan
