HotLS1

I have a stock A4 tranny. The car is used as a DD, but I would like to put a trans cooler on and a stall. What would you recommend? The car has 130k on the stock tranny.

performabuilt

iTrader: (25)

I would stay in the 3000 or under range but definatly in a small diameter converter 9-10 inches. As for cooler always the largest you can fit

Ruckus46Gt

iTrader: (9)

I'm Running A B&m 24k Cooler With A Pro Torque 3000 Stall

koolaid_kid

iTrader: (21)

I run a 3400 stall with a 24k B&M cooler. But my car is not a DD.
Please note, you may have to have the transmission parameters tuned for best street performance after putting the stall in. Just a note. And Performabuilt claims that the stall will end up killing your transmission. I have not been able to find any data to substantiate this claim, but it is a risk you must understand first.

Matt D

iTrader: (49)

Yank PT4400 and B&M 29,000 GVW trans cooler.