Just installed TCI SSF - LS1TECH



Automatic Transmission 4L60E | 4L80E | TH350 | TH400 | TH2004R | Powerglide | Converters | Shift Kits
Sponsored by:
Sponsored by:

Just installed TCI SSF

Reply
 
Thread Tools Search this Thread
Old 06-26-2007, 08:03 PM   #1
On The Tree
Thread Starter
iTrader: (4)
 
sleeperMULLET's Avatar
 
Join Date: Sep 2006
Posts: 179
Default Just installed TCI SSF

Hey guys, I just put in my new TCI Super Street Fighter 4l60E in my 95 Z28. I have a 3.5" Moser D/S and I noticed on the front slip yoke there is a small hole at the end near the u-joint and ATF is pouring out of it. Does this mean I over filled the trans and the tailshaft is full of ATF and that is an exit for it? It didn't do it on my other trans.
sleeperMULLET is offline   Reply With Quote
Old 06-26-2007, 08:43 PM   #2
LS1TECH & Trucks Sponsor
iTrader: (24)
 
performabuilt's Avatar
 
Join Date: Aug 2006
Location: SUGAR LOAF PA
Posts: 10,480
Default

If you remove the tail from you old trans you will likley see what looks like a small tin can with and oring in it , that oring keeps that from happening but I havent noted cars having that, But have seen it many times on trucks, If it is there you can swap it over.but replace the oring , If its not some one likley changed the yoke at sometime and used silicone to seal the hole, Which I have also seen a few times. Seems to work ok well until you take the yoke back off the trans .
performabuilt is online now   Reply With Quote
Reply


Tags
4l60e, gm, oring, tailshaft, transmission

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 05:03 PM.