4L60e to Th 400 Swap? (i already read sticky)
#1
TECH Apprentice
Thread Starter
iTrader: (9)
Join Date: Nov 2003
Location: S.W. Louisiana
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
4L60e to Th 400 Swap? (i already read sticky)
Can someone please give me a complete list of everything needed to swap a 4l60e out to a TH 400. The prices and places to purchase would help also if they are aval. I already read the sticky at the top of the page and its 9 pages of alot of conflicting info. Im trying to see if I want to spend the money on a TH 400 swap or just keep my 4l60e. Thanks guys
#6
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
I got alot my info from the sticky.
This is what I bought, others may have done it different, taken short cuts or whatever.
Rossler TH400
TCI flexplate
Yank transmission crossmember
Neal Chance Torque converter
Steel drive shaft
Cheetah shifter
Madman dipstick
Earls trans cooler
Thats the bulk of the hard parts. There is of course all the little stuff like hardware (TC, flexplate, etc), fluids, I used steel braided hose and russel connectors for the cooler, I went for an upgraded Rossler, had the VSS sensor added, etc... I spent some $$ and their are cheaper parts to buy than what I got.
Good Luck!
Dan
This is what I bought, others may have done it different, taken short cuts or whatever.
Rossler TH400
TCI flexplate
Yank transmission crossmember
Neal Chance Torque converter
Steel drive shaft
Cheetah shifter
Madman dipstick
Earls trans cooler
Thats the bulk of the hard parts. There is of course all the little stuff like hardware (TC, flexplate, etc), fluids, I used steel braided hose and russel connectors for the cooler, I went for an upgraded Rossler, had the VSS sensor added, etc... I spent some $$ and their are cheaper parts to buy than what I got.
Good Luck!
Dan