Stall suggestions?
#1
TECH Resident
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Location: Long Island, NY
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Stall suggestions?
I am gunna be running 2 setups. I am going to first have a huge cam car with a 200 shot, and dunno what stall to run on this when my tranny blows. Any ideas? Second setup will have 13.5 psi of boost via a D1SC.
The motor is a fully forged 347 LS1 with a 240/244 .608/.589 113 cam and all the other stuff witha 12 bolt 3.73's and a 27" slick.
The motor is a fully forged 347 LS1 with a 240/244 .608/.589 113 cam and all the other stuff witha 12 bolt 3.73's and a 27" slick.
#4
Banned
iTrader: (19)
Join Date: Jun 2005
Location: chitown
Posts: 1,879
Likes: 0
Received 0 Likes
on
0 Posts
not a PTseries for a 200 shot. i'd recomend one of their PYE3400 with a 2.7str or their PYE3600 with a 2.3str
it'll be a pooch on motor though... but should work GREAT on spray.
SS4000 i would think would be a good middle of the road verter. good on motor, will hold the spray, but may not get the full advantage of it as you might have some of the power blow through it.
just speculation. i'd call Yank and see what they say.
it'll be a pooch on motor though... but should work GREAT on spray.
SS4000 i would think would be a good middle of the road verter. good on motor, will hold the spray, but may not get the full advantage of it as you might have some of the power blow through it.
just speculation. i'd call Yank and see what they say.