NASTY98TA

iTrader: (34)

Hey are any of you guys with high hp cars using the Bolts that come with a TCI Flexplate? Just asking, because I am doing a TH400 conversion and don't want to go back in and change them?

Brian

9000th01ss

iTrader: (10)

If they're grade 8 or higher (SAE) or 10.9 (metric), the proper length, installed and torqued properly they should be ok.

ss_girl

iTrader: (9)

I ran stock bolts for awhile and on my last tear down I put in ARP's just for piece of mind but I agree with the above. Any good bolts at the right spec should be fine. Be sure to grind off the powder coating where the bolt holes are on the flexplate.

cablebandit

iTrader: (37)

i ran the ones that came with the tci plate but had to go back and add locktite and some star lock washers cause mine kept coming loose. i did grind off the powder coating before it was ever installed