BlackBeautyWS6

iTrader: (8)

Ok so heres my problem. I went to the track and ran the car a couple of times and on my last pass it didnt shift into 4th. Then I put the stall and cam in and it still wont shift into 4th. Before all i had was just some headers and a lid when it did that and the 2nd time is when i put the stall and cam in and its still doin it. I called TSP and they said its time for a rebuild. So what do yall think it could be?

staringback05

iTrader: (8)

id tend to believe tsp...but hows your fluid look?

BlackBeautyWS6

iTrader: (8)

I havent checked it but i just changed it when i did the cam and stall.

performabuilt

iTrader: (25)

Before I did anything I would look at the tuning have you had tuning done for the cam and stall yet ?

BlackBeautyWS6

iTrader: (8)

No I havent had it tuned. But it did the same thing before I had the cam and stall.

performabuilt

iTrader: (25)

well also bear in mind 4th is generally set at a very very high mph in the stock tune I would get it tuned first then see what you have

BlackBeautyWS6

iTrader: (8)

Ya I think thats what Im gonna do but just kinda scared of going and speding $400 on a tune and finding out my tranny is done.

3rdgentug

iTrader: (23)

is there a code set?

BlackBeautyWS6

iTrader: (8)

What do u mean?