Omega Doom

iTrader: (2)

I was wondering where my shift points should be or at least best for drag racing? my TUNER has set them for 6400 shift with a 6600 rev limiter! I thought I have read on here that 6200-6300 is best? also do you guys delete all TM?

Gilbert@Ace Racing

There is no "best" shift point. the shift point is determined by your combination... if your tuner says 6400 then run it if it does not hit the rev rev limiter.

Deleting TM is a personal preference.

g

z28_YOU_HO

iTrader: (7)

what gears do u have?
273's or 323's?
I have 3.23's and have my rev limiter for 6500.
My shift points are
+2mph for 1-2 shift
+2mph for 2-3 shift
+1mph for 3-4 shift

Hope this helps

Omega Doom

iTrader: (2)

OK gotcha! I have a Yank 4200 stall,long tube headers,true duals and bullets,TSP lid and a K&N filter I thought the other day when I was racing I saw the Tach damn near hit 7K but this was on the factory tach and I know the read a little off at times?

cals400ex

iTrader: (27)

i wouldn't think you would need to be that high with the stock cam.