christrusler

I have a 2000 Z28 with automatic tranny,

1st and 2nd gear work just fine, but when it's in higher gears and i push the gas the car revs up but it's not giving me full power to the wheels. Any ideas? Could this be the torque converter? or some solenoid?

performabuilt

iTrader: (25)

Unfortunately sounds like the 3-4 clutch is on the way out

FLT

iTrader: (1)

The 3-4 clutch is your problem. A solenoid is not going to fix the problem with your transmission. Feel free to give our sales representative Andy a call to discuss your situation. Thanks Vince

christrusler

Is this in the tranny ? How difficult is this to replace ?

performabuilt

iTrader: (25)

Yes it is inside the trans and is normally does during a rebuild , If the trans is high millage I would not go in a simply replace the 3-4 clutch I would consider either rebuilding the entire unit or replacing with a performance built unit,