word of advice! custom cts-v shifters..
#1
TECH Apprentice
Thread Starter
iTrader: (17)
Join Date: Oct 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
word of advice! custom cts-v shifters..
well guys i decided i would work with the stock shifter and try to make my own short throw shifter before buying one. word of advice dont do it! i have done it before on mustangs no problem! the v shifters are 2 peice stock from factory to reduce the shifter shakin or something.
what i did and for no one to try....
i started by pulling it all apart down the where it was loose shifter with linkage holding it together....
i cut it off as close to the bottom as possible to work with....that is when i found out it is not hollow and is a shifter on a shifter
no biggey so i it all out to make it flat....
then i stook the shifter lever i had left that was cut out and took out 2 inchs of metal....which by the way if this would have worked was entirly 2 much
lined it back up in the car an mig welded the newly designed shifter back on top of the flatened lower part of shifter....
well in the middle of welding the rubber bushing on the lower side of shifter that i was not aware of caught on fire!!!!
fire what put out and finished welding...
went to put it in gear and shifter pulled off....lucky it was still super hot and put it back on the bushin an threw water on it to cool it and prayed it would stick back
sure enough got it back on and stuck on good....but the bushing we melted now make is sloppy and loose
put everything back on and shifter **** and boot an all back on... looked great and super lower shifter and other then loose bushing was pretty nice
started car up and went for reverse.....couldnt hit it cause shifter **** hit center console!!!
come to find out 2 4 6 gear where the only ones i could hit with new lower stance....went to take the shifter **** off and shifter and all know comes out with it when i do so!!!!
so i just bought the b&m shifter for sale by nbmss under thread name "help" cause i have officaly fucked my shifter up! it is now my only ride and luckly is just good enough to get by and drive around but no racen cause if i got for third gear real hard one good time my shifter pops off! so word of advice to all those who thought the would try it also! DONT! just spend the money and buy a aftermarket one from someone or somewhere and keep the stock one laying around!
took pics on my phone and will see bout posting them up if anyone wants to see and dont know what i am talking about
what i did and for no one to try....
i started by pulling it all apart down the where it was loose shifter with linkage holding it together....
i cut it off as close to the bottom as possible to work with....that is when i found out it is not hollow and is a shifter on a shifter
no biggey so i it all out to make it flat....
then i stook the shifter lever i had left that was cut out and took out 2 inchs of metal....which by the way if this would have worked was entirly 2 much
lined it back up in the car an mig welded the newly designed shifter back on top of the flatened lower part of shifter....
well in the middle of welding the rubber bushing on the lower side of shifter that i was not aware of caught on fire!!!!
fire what put out and finished welding...
went to put it in gear and shifter pulled off....lucky it was still super hot and put it back on the bushin an threw water on it to cool it and prayed it would stick back
sure enough got it back on and stuck on good....but the bushing we melted now make is sloppy and loose
put everything back on and shifter **** and boot an all back on... looked great and super lower shifter and other then loose bushing was pretty nice
started car up and went for reverse.....couldnt hit it cause shifter **** hit center console!!!
come to find out 2 4 6 gear where the only ones i could hit with new lower stance....went to take the shifter **** off and shifter and all know comes out with it when i do so!!!!
so i just bought the b&m shifter for sale by nbmss under thread name "help" cause i have officaly fucked my shifter up! it is now my only ride and luckly is just good enough to get by and drive around but no racen cause if i got for third gear real hard one good time my shifter pops off! so word of advice to all those who thought the would try it also! DONT! just spend the money and buy a aftermarket one from someone or somewhere and keep the stock one laying around!
took pics on my phone and will see bout posting them up if anyone wants to see and dont know what i am talking about
#4
I have lopped off 2" from stock on my previous V. Picked up another V but and used a C5 shifter stalk. I replaced the from bushing with some nylon ones from HomeDepot and did orginally replace the the flutted rubber pair at the base with rubber but they split. Now is the base rubber is gone and crimped.
It is very precise and slightly better than my friends 911tt shifter.
http://www.cadillacforums.com/forums...-v-less-3.html
It is very precise and slightly better than my friends 911tt shifter.
http://www.cadillacforums.com/forums...-v-less-3.html
Last edited by Norm '88 GT; 01-25-2009 at 01:13 PM.
#6
TECH Apprentice
Thread Starter
iTrader: (17)
Join Date: Oct 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
I have lopped off 2" from stock on my previous V. Picked up another V but and used a C5 shifter stalk. I replaced the from bushing with some nylon ones from HomeDepot and did orginally replace the the flutted rubber pair at the base with rubber but they split. Now is the base rubber is gone and crimped.
It is very precise and slightly better than my friends 911tt shifter.
http://www.cadillacforums.com/forums...-v-less-3.html
It is very precise and slightly better than my friends 911tt shifter.
http://www.cadillacforums.com/forums...-v-less-3.html
Last edited by archerandsons; 01-25-2009 at 10:07 PM.
#7
On The Tree
iTrader: (1)
Join Date: Oct 2005
Location: Hilltown
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Semi hijacking here - I have noticed my shifter sucks 5 times as bad when it gets cold (less than 20 degrees). Is it the p.o.s shifter or do I have a separate problem lurking? Other than the shifter I am happy!
Trending Topics
#8
#10
Katech Shifter. Works like a charm - if you figure up the manhours it takes to mod the one you have - then multiply that by how valuable your time is (ie hours off of your life you will never get back, and the headache that goes along with it) then the self-shifter-mod will cost more than a Katech unit...just my $0.02 - but there again, i barely have time to wipe my a$$ so every minute counts for me!
either way the stock shifter SUCKS!
either way the stock shifter SUCKS!
#11
I have lopped off 2" from stock on my previous V. Picked up another V but and used a C5 shifter stalk. I replaced the from bushing with some nylon ones from HomeDepot and did orginally replace the the flutted rubber pair at the base with rubber but they split. Now is the base rubber is gone and crimped.
It is very precise and slightly better than my friends 911tt shifter.
http://www.cadillacforums.com/forums...-v-less-3.html
It is very precise and slightly better than my friends 911tt shifter.
http://www.cadillacforums.com/forums...-v-less-3.html