chpmnsws6

iTrader: (70)

I'm trying to install a CTS-V AC compressor into my LS swapped Miata, but need a schematic for the AC compressor wiring.

Does anyone have alldata or any other form and willing to help?

Thanks guys (and gals)!

L82gofast

iTrader: (1)

Happy to help a fellow gear head

Lee-AnnMarie

Hmm you're good! How about from the Nav unit to the Amp??

chpmnsws6

iTrader: (70)

You are a life saver!

Happy Memorial day ya'll

Lee-AnnMarie

So is this a, no you don't have one, or no you won't send me one?

chpmnsws6

iTrader: (70)

If you own a V, it'd prolly be a good idea to have a subscription to alldata anyway. If I had more then just an AC compressor off the car, I'd own a 5 yr subscription.

L82gofast

iTrader: (1)

Sorry I am not on here every day. Let me see what I can dig up...

L82gofast

iTrader: (1)

here ya go

Lee-AnnMarie

Thanks so much!!! Really appreciate it

chpmnsws6

iTrader: (70)

You've made two new friends!

chpmnsws6

iTrader: (70)

One more question. How many ounces of PAG are needed for the compressor? I'm hearing anywhere between 4 and 9 ounces, which is a HUGE span!

L82gofast

iTrader: (1)

Not sure. This is all it says:
The Denso replacement compressor is shipped with 74 ml (2.5 oz) of refrigerant. IMPORTANT: The refrigerant oil in the A/C system must be balanced during compressor replacement.
Before installing the compressor, the refrigerant oil will have to be fully drained.
Add back the same quantity of polyalklene glycol (PAG) oil as drained from the removed compressor. Refer to the amount of refrigerant oil recorded during the compressor removal.