I8URSVT

iTrader: (2)

For those of you that wrapped your long tubes, how many feet of wrap did you end up using?

Sumter

iTrader: (3)

Here's a calculator to help estimate the length needed

http://www.designengineering.com/nit...wrap_calc.html

Sweetwilliebrownjr

I used 2 50' rolls. That was just the driver side. I haven't done the passenger side.

NIKDSC5

iTrader: (10)

^what he said.

DrSpeed

iTrader: (4)

2 rolls of 50' DEI did both headers.

Pacesetters for reference.

Sweetwilliebrownjr

50' was enough, but I double wrapped it because I was having trouble with heat and the clutch fluid.

shadyLS6

sprayed it with hi temp header paint- 2 rolls of 50 DEI then used the DEI spray on the wrap. still looks good

read some threads for some useful header info:
https://ls1tech.com/forums/cadillac-...rap-wires.html

http://www.cadillacforums.com/forums...ecautions.html

soulja

iTrader: (3)

2 Roll of 50ft was more than enough.

Big Black SS

iTrader: (3)

Is header wrap necessary if the camaro has a heat extractor hood?

BudRacing

iTrader: (3)

The header wrap is more for protecting nearby components and lines than it is under-hood temps. There are wires, brake lines, and clutch fluid lines to protect. The slightly lower temps underhood and higher flow rates (bc of heat) are only minor benefits in comparison.

I8URSVT

iTrader: (2)

well i got 2 rolls of 50ft of wrap, will be wrapping them soon. i'll post pics once they are done.

odthetruth

iTrader: (4)

3 rolls of 50 foot wrap should seal the deal.

thefullmonty_07

iTrader: (1)

I used 2 rolls of 2x50 and there was a little left over.

BudRacing

iTrader: (3)

Same here. 3 is overkill.

TheLostDriver

I bought 2 rolls and used none. Might bite me in the rear later but till then.....

98sickspeedblkta

Just put my headers in last night and wishing i wrap mine. Will see how look starter and powercable last