ATTN B&B exhaust users...
#1
ATTN B&B exhaust users...
I had to remove my mid pipe to install my clutch last night & didn't realize the midpipe had gaskets on it. I had to reuse the old ones that were on there, but they are pretty trashed & I wanted to order some new ones. I wanna say the ones that were on the car felt like metal with a mesh core?
These are the only 3" ones I could find that look like they match up...Are these what you guys are running?
http://www.summitracing.com/parts/VPE-1458/?rtype=10
If not, where can I buy a new set? I don't see anything on B&B's website...
Thanks...
These are the only 3" ones I could find that look like they match up...Are these what you guys are running?
http://www.summitracing.com/parts/VPE-1458/?rtype=10
If not, where can I buy a new set? I don't see anything on B&B's website...
Thanks...
#2
Staging Lane
iTrader: (1)
Join Date: Mar 2012
Location: Temple TX
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
I've "restored" those kinds of gaskets with a coating of Coppercoat. It'll work in a pinch, at least...
http://www.google.com/m/products/cat...ed=0CEgQ8wIwAg
http://www.google.com/m/products/cat...ed=0CEgQ8wIwAg
#3
TECH Fanatic
iTrader: (3)
I had a few sets made from solid copper that are about 1/8" thick.
That and a smear of "Ultra High Temp Copper Gasket" provided a pretty good seal.
http://www.amazon.com/Permatex-81878...6012654&sr=8-1
That and a smear of "Ultra High Temp Copper Gasket" provided a pretty good seal.
http://www.amazon.com/Permatex-81878...6012654&sr=8-1