07CTS-V

iTrader: (6)

I am starting a caliper powder coating exchange program for V1 calipers. I have two sets ready for circulation and will be getting more as time goes on.

:EDIT:
The cost for any color with a logo of your choice is $360 + your used calipers returned to me after you swap them out. I will have them powder coated to the color of your choice with the emblem of your choice and I will replace the seals and dust boots with new ones on all calipers I ship out. The emblems are 100% powdercoat, i.e. they are not vinyl decals.

V2 calipers are $575 + your old calipers returned to me after you swap them out.

:END EDIT:

Here is some of my powder coater's work.

This is an air tank in a truck at SEMA this year. It is a black base, decal applied, illusion orange base coat, decal removed, illusion orange clear coat.



These are my calipers. They are a silver base coat, decal applied, illusion purple base coat, decal removed, illusion purple clear coat.

BudRacing

iTrader: (3)

Nice, I had my calipers done for the same price a few years ago from some email I found someone refer on a forum. It's good to see a familiar person in the V community offering the same.

actrite80

iTrader: (2)

Do you have a color chart

07CTS-V

iTrader: (6)

We can do any color. We prefer to use prismatic colors.

Pick from any color on their website.

www.prismaticpowders.com

tlorenzen

If you're still doing this come summer, count me in.

Camaro350Z28

iTrader: (6)

Definitely a fan. Need mine done. Had recall on my brake lines and they got brake fluid all over one of my calipers. Smh. Ate it up pretty good. To find a color I like with my red.

Sssnake

What is the largest part you can coat? Front shock tower brace?

Screaming_Turtle

Oven is 4'x4'x8' brace is no prob.

Sssnake

Hmmmmmmmm

rjoffe

I hope you are not thinking about powdercoating a full sheet of plywood

badbird

iTrader: (2)

That price is for a full set of calipers right? How much for just a pair of Gen1 V fronts?

07CTS-V

iTrader: (6)

$180 + $25 shipping and a refundable $300 core deposit.

badbird

iTrader: (2)

You've got a pm about this

07CTS-V

iTrader: (6)

The longest we can do is 8 feet long. We have done several strut tower braces.

07CTS-V

iTrader: (6)

barrok69

How much would it be to do two 17x7" wheels center sections including inner barrel that have a machined/polished non removable lip? Color Gloss Black. (currently hypersilver)

07CTS-V

iTrader: (6)

$100 per wheel plus shipping. It probably more beneficial to find a local coater for something like that.

sniperwolf078

How can I contact you.
I have a brand new set of CTSV calipers- 4 piston. I need to powder them to red.

07CTS-V

iTrader: (6)

Email. br_1868@hotmail(dot)com

07CTS-V

iTrader: (6)

Another set of V2 calipers sent out. Pearl white with a black emblem.