Cadillac CTS-V 2004-2007 (Gen I) The Caddy with an Attitude...

Burning oil after H/C install

Thread Tools
 
Search this Thread
 
Old 04-02-2009, 11:46 AM
  #1  
On The Tree
Thread Starter
iTrader: (1)
 
White SS's Avatar
 
Join Date: Oct 2002
Location: ft. washington md
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default Burning oil after H/C install

I never noticed it before (because I do not drive the car much) But my 05 V has been burning oil sense the H/C install about 1 qt every 3000 mi? Is that normal the car has 24K miles and about 7K with the H/C
Old 04-02-2009, 11:54 AM
  #2  
TECH Addict
iTrader: (5)
 
jerrad's Avatar
 
Join Date: Oct 2004
Location: NE Texas
Posts: 2,119
Likes: 0
Received 0 Likes on 0 Posts

Default

Did it use any before the hc? Don't alot of lsx engines use oil? I thing it has something to do with a piston ring.
Old 04-02-2009, 11:55 AM
  #3  
TECH Addict
iTrader: (5)
 
jerrad's Avatar
 
Join Date: Oct 2004
Location: NE Texas
Posts: 2,119
Likes: 0
Received 0 Likes on 0 Posts

Default

Also, is there any oil in the antifreeze or vise versa? Might have pinched a gasket.
Old 04-02-2009, 01:39 PM
  #4  
On The Tree
Thread Starter
iTrader: (1)
 
White SS's Avatar
 
Join Date: Oct 2002
Location: ft. washington md
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jerrad
Did it use any before the hc? Don't alot of lsx engines use oil? I thing it has something to do with a piston ring.
I did not drive the car enough to notice before and nothing in the antifreeze
Old 04-05-2009, 08:09 PM
  #5  
TECH Enthusiast
iTrader: (12)
 
scatillac's Avatar
 
Join Date: Jun 2006
Location: Ruckerville, Ky
Posts: 584
Likes: 0
Received 2 Likes on 2 Posts

Default Oil Consumption

Without a baseline consumption record for comparison's sake, it's hard to say, although depending on the heads (and porting done to them) you are more than likely pulling oil in through the rocker arm mounting bolt holes or through poorly sealing valve guide seals (or both).

Porting (on a cathedral port head) generally exposes the bolt hole to the intake port and if not properly sealed, oil will pass through to the combustion chamber.

Leaking valve guide seals are either damaged during their installation or are of inferior quality (read: cheap) .

3000 miles is not very bad oil consumption though, especially if you do a search on what has happened to other folk's cars after a mod.
Old 04-08-2009, 12:02 AM
  #6  
Launching!
 
BOATDOCTOR's Avatar
 
Join Date: Feb 2009
Location: southern california, la area
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Default

Do you see smoke out of the tail pipes?



Quick Reply: Burning oil after H/C install



All times are GMT -5. The time now is 02:39 AM.