Stone17

iTrader: (3)

Look what brown dropped off today.

Katech Shift kit.
It come with Shifter- aluminum or stainless steel 1, Washer-shift **** 1, Nut shift **** 1, Bolt-5/16X24X1/2 button head socket cap 2, Nut-jet 5/16-24 2, Seal-exhaust manifold 2, Tap-5/8-18NF 1, Drill-5/16 1 and Punch-pin 1/16 1

raven154

iTrader: (14)

I have the same shifter and you'll love it! Make sure to replace the shift linkage nut with a nylock and dont get it too tight or it will be hard to get into gears, especially 1st and reverse.

GhettoTy

iTrader: (2)

I'm running that same shifter and it's awesome.

Stone17

iTrader: (3)

How was the install? Easy?
I'm think about doing it when I get my Anti-wheelhop kit in and my corsa exhaust.

SoJersey05V

Super easy install... be easy on the drill bit, I broke mine! And yourself some shift linkage bushings from luke at lindsay cadillac, the factory rubber ones suck!

Stone17

iTrader: (3)

I have the bushing are in the mail.

SoJersey05V

then you are set!!!

Stone17

iTrader: (3)

I probably going to wait till my Corsa Exhaust comes in before I install the Shifter.

SoJersey05V

Sounds good!

07CTS-V

iTrader: (6)

It's much easier with the exhaust out of the way.

Stone17

iTrader: (3)

I wonder how loud this car is with out the exhaust. I guess I will find out saturday

07CTS-V

iTrader: (6)

Mine is LOUD, I ripped apart the exhaust putting it on a trailer once. Now I'm buying electric cutouts to get the same effect.

Your rear O2 sensors need to be tuned out unless you don't mind seeing the CEL.

Stone17

iTrader: (3)

I just want to drive the car up and down the street pissing off the neighbors.

07CTS-V

iTrader: (6)

Yeah, that is fun. My neighbors hate me from just my B&B exhaust without cutouts. I set off alarms at 5:30 am while TRYING to be quiet.

Stone17

iTrader: (3)

The bushing did not make it today.
Sucks