Max from Creative Steel is officially the CTS-V Doctor
07-20-2010, 06:00 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: Western New York
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Max from Creative Steel is officially the CTS-V Doctor I just finished replacing the stock gummy bear diff mount bushing in the V with a CS gray piece and it substantially helped the clunk noise. I know people allready know that this is a must for the V but the tool that he has to remove the old one and install the new one is where I was impressed.
I could not imagine doing this job without the tool. All I had to remove 3 bolts that hold the diff housing in the car, then just press out the old, press in the new one one put it all back together.
His customer service is also A+ and I would recommend him to anybody. Us V owners are truly blessed that he has a V himself and has addressed the problems with his knowledge and skill and came out with the Creative Steel products.
I could not imagine doing this job without the tool. All I had to remove 3 bolts that hold the diff housing in the car, then just press out the old, press in the new one one put it all back together.
His customer service is also A+ and I would recommend him to anybody. Us V owners are truly blessed that he has a V himself and has addressed the problems with his knowledge and skill and came out with the Creative Steel products.
07-20-2010, 08:19 PM
#3
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: Western New York
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, he just started doing this in May I think. You have to pay $20 bucks to borrow the tool and there is a deposit to make sure it is returned, but again it is well worth it.
07-21-2010, 02:26 PM
#7
TECH Apprentice
iTrader: (4)
Join Date: Jan 2010
Location: GA
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
