liqidvenom

iTrader: (2)

that makes some of the other 408 guys wonder

Skidmarcx

Badass... Dudes got money with those custom skinnies and what seemed like an automatic conversion

54inches

iTrader: (4)

Fuzzy, was that you?

liqidvenom

iTrader: (2)

despite what seems like begging to no longer be running this thread it seems the mods would rather let it die than find another person to take care of it.


I will try this weekend to update the thread, no need for this thing to die after 10 pages.

cts-vls6

iTrader: (7)

im on the right line new mod is cs.8.8 kit with 4.10 gear still 5.5 to 6 lb of boost

OneSlowV

iTrader: (2)

Nice what type of FI you running

kjr6306

iTrader: (1)

Got some new tires....ran a 12.6550 and a 12.7260.

12.6550 @ 113.88 MPH 60' 2.0865 (KJR6306) V1 LS6 Maggie 112, 90mm TB, Dyno Tune.

Tires used on the pass: 275/40/18 Sumitomo HTR ZIII (New)
Performance Mods (if any): Maggie 112, 90mm TB
Category submitted for: Power adder
R/T.......... .1305
60'............. 2.0865
330'........... 5.5385
660'........... 8.3133
660’ mph... 90.11
1000'.......... 10.6683
1320'.......... 12.6550
1320’ mph… 113.88
Name of the track: Thompson Raceway Park, Thompson, OH
Date of pass: August 14, 2013
Weather conditions: 66 Degrees, DA ft. 1882

[IMG][/IMG]

MN_V

iTrader: (5)

13.179 @ 113.16. 2.170 60' (MN_V) V1 LS2, kooks headers, high flow cats, magnaflow exhaust, W4M mail order tune.

All stock otherwise. Hankook V12 tires. 60lbs of audio in trunk. 210lb driver.

This might get me on the list it looks like. Run is on the left.

54inches

iTrader: (4)

GulfM3:

buddyg

[IMG][/IMG]

Please add me to the list

10.77 @ 127.6 mph - 60ft 1.5739 (Buddyg) V2 cam, headers, injectors, intake, ported blower.

bmylez

iTrader: (3)

13.73 @ 107.99. V1 LS2, Kooks 1 3/4 long tubes, cats, K&N intake, ported intake manifold, G-Force axle (still had bad wheel hop)

I'm pretty disappointed in my trap speed, but people are telling me it's normal for my mods. Temperature was low-mid 60s, altitude of ~700 ft. Maybe I should just go dyno to make sure my motor is producing as much power as it should.

liqidvenom

iTrader: (2)

So...i've been out of the country for 3 months busy with other things. I had hoped that another person would have taken over this thread to keep it up to date in my absence. Seems the Mods, i have contacted do not care to assist in that.

I get back to the land of the prudish this weekend and after making sure things work in my place i'll try to find some time next week to update this thread.


Still don't know why this cant be handled by more than one guy....or passed onto a guy who has more free time than i do.

CHE-VEE

10.586@130.44 (CHE-VEE) V2 upper/lower, CAI, ID850's, corsa mufflers, stock exhaust mani's and pipes with 2 cats.

Please add me to the list...thx

This is the only site that I can't load a picture to, I can't understand it!!! Here is the only way that I can get a picture here so hopefully you can see it as I know it comes up small!

http://www.ctsvowners.com/forum/atta...1&d=1386191367

bmylez

iTrader: (3)

You have to be a member (most on here may be a member, but I'm not) to see that. Just upload your picture to a site like Photobucket and then link it here, not very hard...

Blown_Red_97z

iTrader: (3)

2.3 60' is killing you. That's a low 13 if you can hook which is on par with your mods

McRat

With 1600 miles, my wife and 2 kids went up to Sacramento on the way up North.

It ran 12.36@117 bone stock, original PS2's, on a damp track with luggage in the trunk.

Traction issues. Not proud of the ET's.

https://www.youtube.com/watch?featur...v=9VhK_20zhIMa

4doortypels

iTrader: (39)

Is this thread dead?... ill be shooting for NA times soon. Just a got a retune. First run 13.1 @110mph gotta get a tire

johnny2343

Brian in GA

Here are the slips I couldn't attach to the PM Liquivenom.

9.56 @142, 1.41 60'.

Vengeance Racing built.

rand49er

Brian, that is one fast car.