View Poll Results: To sticky or to not sticky
Yes this is good info to have readily available
78
95.12%
NO! why would you want this at the top of the page like that!
4
4.88%
Voters: 82. You may not vote on this poll
CTS-V Exhaust Example Thread
12-21-2012, 07:23 AM
#61
Teching In
Join Date: Apr 2012
Location: Raleigh, NC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
That thing sounds BEASTLY! Did you decide against cutouts?
FWIW - I talked to Dave from DMH last week, placed a gift order for a 3" e-cutout and it was shipped the very next day. Hooray for 4 year warranties instead of QTPs 90-day! I submitted a paypal payment directly to ecutout@yahoo.com and specified the details that the online form asks for, using Paypal's notes section to "place my order".
I know this topic has been kicked around over and over, but he has been out of pocket due to family issues and the people he had working for him weren't answering the phones and the website wasn't submitting the orders correctly or notifying them that orders were being placed. He's working on a full revamp of the website, which should be done in the next 2 weeks or so, but if you're looking for the low profile cutouts you can order directly from DMH or Maryland Speed has them back on their site now: http://marylandspeed.com/dmh-low-pro...ut-p-1313.html
I'm crossing my fingers that someone will gift some to me for Christmas (riiiiight ...) or I'm biting the bullet after Christmas to go for it!
FWIW - I talked to Dave from DMH last week, placed a gift order for a 3" e-cutout and it was shipped the very next day. Hooray for 4 year warranties instead of QTPs 90-day! I submitted a paypal payment directly to ecutout@yahoo.com and specified the details that the online form asks for, using Paypal's notes section to "place my order".
I know this topic has been kicked around over and over, but he has been out of pocket due to family issues and the people he had working for him weren't answering the phones and the website wasn't submitting the orders correctly or notifying them that orders were being placed. He's working on a full revamp of the website, which should be done in the next 2 weeks or so, but if you're looking for the low profile cutouts you can order directly from DMH or Maryland Speed has them back on their site now: http://marylandspeed.com/dmh-low-pro...ut-p-1313.html
I'm crossing my fingers that someone will gift some to me for Christmas (riiiiight ...) or I'm biting the bullet after Christmas to go for it!
Last edited by pimpin_one; 12-21-2012 at 07:33 AM.
01-13-2013, 07:59 AM
#62
Teching In
Join Date: Aug 2012
Location: Scandia MN
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Sorry have not been on for awhile, here is a pic of the cam sheet I got with my car, and this is just a weekend car so the note she sings is perfect if not a bit tame....
Hey pimp! Still going to do the cut outs!, thanks for the poke on that, need to order soon as the spring list is building..
Hey pimp! Still going to do the cut outs!, thanks for the poke on that, need to order soon as the spring list is building..
01-28-2013, 10:06 AM
#64
OBX 1 7/8 headers, hi-flow cats, stock catback w/ stock resonator but with stock mufflers swapped out for Maxflow stainless straight-thru mufflers (these are basically Magnaflow clones but have slightly better flow).
As usual, the video doesn't perfectly describe the sound. It has a very deep rumble at idle that the video doesn't catch. Turn your bass up all the way and maybe you'll come close. That rumble carries quite a distance. However, it is not loud or raspy, thanks to having the stock resonator in place. There was some resonance when I first had them swapped out, but the resonance has diminished almost completely as the mufflers have broken in, and it's developed a throatier note. I like it more and more. My next mod would be to get rid of the resonator because I actually want a little more volume and crispness, but I may hold off and save my coin till I can put a full 3-inch catback on there.
As usual, the video doesn't perfectly describe the sound. It has a very deep rumble at idle that the video doesn't catch. Turn your bass up all the way and maybe you'll come close. That rumble carries quite a distance. However, it is not loud or raspy, thanks to having the stock resonator in place. There was some resonance when I first had them swapped out, but the resonance has diminished almost completely as the mufflers have broken in, and it's developed a throatier note. I like it more and more. My next mod would be to get rid of the resonator because I actually want a little more volume and crispness, but I may hold off and save my coin till I can put a full 3-inch catback on there.
04-13-2013, 03:21 PM
#67
TECH Enthusiast
It's only been two years since I've had the car...
Finally going to post my exhaust on here.
The video:
http://www.youtube.com/watch?v=dIMg-...ature=youtu.be
Pic attached
-meaty
Finally going to post my exhaust on here.
The video:
http://www.youtube.com/watch?v=dIMg-...ature=youtu.be
Pic attached
-meaty
04-26-2013, 11:04 PM
#68
Teching In
Join Date: Dec 2012
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
It's only been two years since I've had the car...
Finally going to post my exhaust on here.
The video:
http://www.youtube.com/watch?v=dIMg-...ature=youtu.be
Pic attached
-meaty
Finally going to post my exhaust on here.
The video:
http://www.youtube.com/watch?v=dIMg-...ature=youtu.be
Pic attached
-meaty
04-27-2013, 04:32 PM
#69
TECH Enthusiast
Cheapest exhaust ever
Gets compliments frequently, one last night from a guy from New Jersey in a Gran Prix lol
-meaty
05-24-2013, 08:57 AM
#70
Teching In
Join Date: May 2013
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Everyone with stock manifolds... Did y'all leave the cats in place and do a cat back? My girls car has a magnaflow cat back with x pipe, with stock mani's and cats. thought about deleteing the cats for now till the LT's go on...
05-24-2013, 09:02 PM
#71
TECH Enthusiast
-meaty
06-22-2013, 03:51 PM
#74
On The Tree
iTrader: (1)
Join Date: Sep 2012
Location: Middle TN
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
2007 CTS-V with stock manifolds, stock cats, MagnaFlow catback with X pipe:
2007 CTS-V with stock manifolds, MagnaFlow High Flow Cats, and MagnaFlow catback with X pipe:
Going to make a better video with hihg-flow cats...this one is 10 minutes after install.
2007 CTS-V with stock manifolds, MagnaFlow High Flow Cats, and MagnaFlow catback with X pipe:
Going to make a better video with hihg-flow cats...this one is 10 minutes after install.
07-05-2013, 07:48 AM
#76
9 Second Club
Join Date: Aug 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Stainless Works headers, 2" primaries, 3" catless X pipe into the stock muffler.
Just for giggles....
This clip though is with the QTP cutouts open installed before the muffler.
QTP's open at WOT.
The 3rd clip I toggle the cutouts open and closed under driving conditions.
Brian
Just for giggles....
This clip though is with the QTP cutouts open installed before the muffler.
QTP's open at WOT.
The 3rd clip I toggle the cutouts open and closed under driving conditions.
Brian
Last edited by Brian in GA; 07-05-2013 at 07:54 AM.
08-06-2013, 11:20 AM
#78
TECH Fanatic
iTrader: (8)
Join Date: Jun 2010
Location: Helendale
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
Interior run...video was down with my phone, and it a bit shaky.
My exhaust set up is American Racing headers, no cats, stock mufflers. Auto transmission is in sport mode...and you can see how fast this thing will drop down into 2nd gear...
One of these days I will do an exterior/interior clip with a better camera.
My exhaust set up is American Racing headers, no cats, stock mufflers. Auto transmission is in sport mode...and you can see how fast this thing will drop down into 2nd gear...
One of these days I will do an exterior/interior clip with a better camera.
08-10-2013, 02:47 PM
#80
TECH Enthusiast
Interior run...video was down with my phone, and it a bit shaky.
My exhaust set up is American Racing headers, no cats, stock mufflers. Auto transmission is in sport mode...and you can see how fast this thing will drop down into 2nd gear...
One of these days I will do an exterior/interior clip with a better camera.
45-120
My exhaust set up is American Racing headers, no cats, stock mufflers. Auto transmission is in sport mode...and you can see how fast this thing will drop down into 2nd gear...
One of these days I will do an exterior/interior clip with a better camera.
45-120
I hate you.