Cadillac CTS-V 2004-2007 (Gen I) The Caddy with an Attitude...

Neutral safety switch

Old 05-27-2012, 07:05 PM
  #1  
On The Tree
Thread Starter
 
catch2otwo's Avatar
 
Join Date: Jul 2010
Location: San Fran
Posts: 167
Likes: 0
Received 1 Like on 1 Post

Default Neutral safety switch

So I got my car back from the dealer and they replaced a bad cat and changed my oil. They unplugged my battery while doing the work.

Got my car and the last few days its had an intermittent start issue. Symptoms are like this, put key in, step in the clutch, and nothing. Try it a few times and randomly it will start normal.

Ive tried a few different combos with starting over and over again with the key and I have found that it usually starts if I let the clutch out, and step it back in again.

My guess is there may be something wrong with the neutral safety switch? Where should I start my trouble shoot? Sometimes it will just start first try.

Edit: Battery is charged, I took it on a 30 minute highway cruise, as well as left it on a battery tender for over 24 hours.
Old 05-27-2012, 09:09 PM
  #2  
TECH Resident
iTrader: (2)
 
wes8398's Avatar
 
Join Date: Apr 2010
Posts: 947
Likes: 0
Received 0 Likes on 0 Posts
Default

http://www.cadillacforums.com/forums...p0833-how-.pdf

I came across this in my search. The part you're speaking about is actually called the clutch position switch. I just finished doing my best impression of a contortionist and taking my CPS out because my cruise control isn't working. Fun, fun.
Old 05-27-2012, 11:04 PM
  #3  
On The Tree
Thread Starter
 
catch2otwo's Avatar
 
Join Date: Jul 2010
Location: San Fran
Posts: 167
Likes: 0
Received 1 Like on 1 Post

Default

Thanks for the iink. If my switch is bad will it def throw that code mentioned in the pdf? I so far has no CEL
Old 05-28-2012, 08:29 AM
  #4  
CTS-V Shifter Sales
iTrader: (6)
 
07CTS-V's Avatar
 
Join Date: Aug 2008
Posts: 1,164
Likes: 0
Received 8 Likes on 7 Posts

Default

Not all codes light up the CEL.
Old 05-28-2012, 11:44 AM
  #5  
TECH Resident
iTrader: (2)
 
wes8398's Avatar
 
Join Date: Apr 2010
Posts: 947
Likes: 0
Received 0 Likes on 0 Posts
Default

I didn't have any CEL's but I plugged in my OBD II reader this morning just to see. Sure enough there was a code for the CPS. I cleared it and now CC is working just fine. Of course, disengaging the clutch doesn't cancel the CC, and the car will start without disengaging the clutch, but It'll fix that when I get the new CPS installed (special order).
Old 05-28-2012, 12:52 PM
  #6  
On The Tree
Thread Starter
 
catch2otwo's Avatar
 
Join Date: Jul 2010
Location: San Fran
Posts: 167
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by 07CTS-V
Not all codes light up the CEL.
Didnt know that, ill have to scan tonight.
Old 05-30-2012, 08:11 AM
  #7  
On The Tree
Thread Starter
 
catch2otwo's Avatar
 
Join Date: Jul 2010
Location: San Fran
Posts: 167
Likes: 0
Received 1 Like on 1 Post

Default

So scanned it. no codes, This weekend ill try jumping out the sensor to see if anything changes. Anyone know i f there are any wires or connectors near the bank 2 cat that may have been messed up when the dealer replaced the cat? I took a quick peak yesterday and didnt really notice anything a muck.
Old 06-02-2012, 06:04 PM
  #8  
On The Tree
Thread Starter
 
catch2otwo's Avatar
 
Join Date: Jul 2010
Location: San Fran
Posts: 167
Likes: 0
Received 1 Like on 1 Post

Default

ok for future reference for anyone searching, my clutch position switch springs were pretty jacked. I ordered a new one from ac delco off of amazon for 26 bucks shipped. AC delco part number is D2230C. The part number I used to find that was the number on my original part which is 11516184. We will see if this is the culprit
Old 06-02-2012, 06:12 PM
  #9  
TECH Resident
iTrader: (2)
 
wes8398's Avatar
 
Join Date: Apr 2010
Posts: 947
Likes: 0
Received 0 Likes on 0 Posts
Default

If you're impatient and want to see if that's your culprit without waiting for the new part, just 'jump' the connector with paper clips. I posted a pic on my thread related to this.


Thread Tools
Search this Thread
Quick Reply: Neutral safety switch



All times are GMT -5. The time now is 12:22 AM.