CTS-V LEE

iTrader: (1)

Does anyone know where to get cts v ashtray nitrous switch panel or does it have to be custom made?? Also to all of u....get ur stock throttle body ported...best bang for ur buck...80 bucks and i can really feel a diff....

nikon

iTrader: (2)

I believe their all custom...they do occasionally pop up for sale in the classifieds though....and where'd you get the TB done at? isn't it something that can be done at home for even cheaper??

NoRice

how bad do you guys want a panel?

NoRice

fly by wire cars are a pain in the *** to remove the shaft. IMO just cleaning the bore up isn't enough, you need to trim the shaft to get max gains out of this mod. the best bet is get a vendor to port a tb and a intake for $350ish plus cores. thats were the cheap power is

CTS-V LEE

iTrader: (1)

almost anybody who does port work will do a tb for about 80 bucks and an intake for 100...and i do need a nitrous switch panel

NoRice

i would do a TB for 80 but i wont touch a intake for 100..


what setup do you need? purge, arm, heater ?

Brentman2007

I used to have one for my cts

just get crazy with the dremmel

CTS-V LEE

iTrader: (1)

that looks good!

CTS-V LEE

iTrader: (1)

i am having two bottle heaters and a purge...if u make something send me a pic an il buy it...i want it to look clean and have nice switches

Brentman2007

thanks it was pretty easy actually i just made a cardboard prototype and then translated it to that to some ABS PLASTIC
you can find that stuff anywhere I got mine off of ebay. But yeah it took me a few tries but just buy a 12x12 piece and you can mess up a few times.

for the record though if you have a bottle heater and opener and purge you will have to cut out the back of the tray and probebly wont be able to fold it up.

and i would soder your connections either way if you plan on folding the tray up

all the switches can be bought at autozone and actuall match the blue and red on out climate control

here ya go http://cgi.ebay.com/ebaymotors/ABS-P...spagenameZWDVW

NoRice

hmm, no master arm ?

NoRice

http://img.photobucket.com/albums/v2...1/SANY0011.jpg :shrug:

what Brentman has is off the shelf switchs and thats the best way to go since you need relays anyway

Brentman2007

haha i almost used real carbon fibre but i never got around to makind another plate. I just threw the piece I had away last week too

NoRice

they just sit in my tool and i make RC parts every now and then :o

Brentman2007

that looked pretty nice though

oh and as you said the autozone switches look like the factory climate control blue and red so it matches very nice

NoRice

yeah its looks like $25 gets you 16 of the rounds ones , and anther $3 gets you a purge from ebay


i think i'll go to cadillacforums and see how much carbor i can get rid of

Brentman2007

dont think alot of cts's are sprayin but you could definatly sell a few I would think I just gave mine away to the guy that bought my kit. Guess i should have kept it now btw check out my old setup on my fquick (its my old 03 cts and i kinda miss it)

NoRice

i was looking at your stuff when i desiding to buy my V, i ended up getting the red 05 that for sale here. the paints alittle rough so i've been working on that before i start really modding

Brentman2007

yeah you still got a hell of a deal I wanted red actually

CTS-V LEE

iTrader: (1)

that looks good...il take one with master arm heater an purge or just the plate bare