spring fever
#1
spring fever
just pulled the trigger on a fast 102 intake .ewp and under drive pully
but got me to thinking how long my stock 90k 4l60e will last
i dont want it to take out my circle d 5c converter
who in the southern ontario area is good with theses trans or do i need to go to the states?
thanks
but got me to thinking how long my stock 90k 4l60e will last
i dont want it to take out my circle d 5c converter
who in the southern ontario area is good with theses trans or do i need to go to the states?
thanks
#2
12 Second Club
iTrader: (8)
How is the fluid? are you running Dex 6 synthetic?
Have you pulled the pan?
If you pull the pan and there is no black clutch material in there you should be ok.
Mine had 133,000 miles on it with 15,000 miles with a FTI 3600 triple disc.
Its all in the tune with these trannies you need to massage tq mgmt not remove it.
Have you pulled the pan?
If you pull the pan and there is no black clutch material in there you should be ok.
Mine had 133,000 miles on it with 15,000 miles with a FTI 3600 triple disc.
Its all in the tune with these trannies you need to massage tq mgmt not remove it.
#3
TECH Junkie
Just keep the transmission temps nice and cool.
Add a shift kit, boost valve, 2-3 shift valve.
The 2-3 shift valve will keep the overrun clutches applied when your selector is in D3 threw all gears as opposed to just applying during the 2-3 shift when fluid is critical to the 3-4 clutch pack.
Also keep your tranny fluid overfilled about half a quart to full quart above the full line to prevent 3-4 clutch fluid starvation at wot during the 2-3 shift.
If your tranny does go out your converter won't be junk. You will just have to send it in to get a cut and clean for about $200
I have just a little torque management in my 1-2 shift and none on my 2-3
Add a shift kit, boost valve, 2-3 shift valve.
The 2-3 shift valve will keep the overrun clutches applied when your selector is in D3 threw all gears as opposed to just applying during the 2-3 shift when fluid is critical to the 3-4 clutch pack.
Also keep your tranny fluid overfilled about half a quart to full quart above the full line to prevent 3-4 clutch fluid starvation at wot during the 2-3 shift.
If your tranny does go out your converter won't be junk. You will just have to send it in to get a cut and clean for about $200
I have just a little torque management in my 1-2 shift and none on my 2-3
Last edited by 98CayenneT/A; 03-13-2017 at 09:31 PM.
#5
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Trans can never go over 180. Leave all the TM in it.
Stock is eventually gonna start slipping.
I ran 8's on mine but it was an RPM.
There the only ones that can build it right. If you ever need one i'm an RPM dealer.
Stock is eventually gonna start slipping.
I ran 8's on mine but it was an RPM.
There the only ones that can build it right. If you ever need one i'm an RPM dealer.