opinions on my cam choice?
#1
opinions on my cam choice?
I have an ISKY 234, 248... 600, 609 on a 108 in my stock bottom end ls1... stock pistons were fly cut to clear. 241 heads, Vic Jr intake both ported by a reputable local guy.(Killians Porting Service). The heads were ported in 2009, all I remember from the flow numbers is the intake was 308 @ .600. Holley street Hp 750 with mechanical secondaries. The motor is in a 98 s10 and I am running sanderson 1 5/8 shorties.
I was just wanted to get some opinions on my setup how you guys think the cam will perform?
I was just wanted to get some opinions on my setup how you guys think the cam will perform?
Trending Topics
#10
TECH Fanatic
iTrader: (12)
TCI super street fighter will probably stall a little low, just because low end torque is going to be a problem with your set-up. Upside is that tail-light S10 will probably hook with it, and when that LS monster gets in the power band it will make up for it. I like the set-up! shouild work good on a greasy friday night test and tune at the dollar.
#11
I actually got a good deal on the cam. Its an off the shelf cam, supposed to be ground for use with a Carb.
The tci converter should be OK for now. A friend of mine had it brand new in the box for a build he never finished so I don't have much in it either. The truck should be ready for the silver dollar soon. And your right slip and slide Friday nights will definetley put my suspension to the test.
The tci converter should be OK for now. A friend of mine had it brand new in the box for a build he never finished so I don't have much in it either. The truck should be ready for the silver dollar soon. And your right slip and slide Friday nights will definetley put my suspension to the test.