dmracing

iTrader: (78)

Hers some pcs of my Mustang Coupe swap with the brp mounts
Only have one issue not the mounts faults. But my tall valve covers hit the brake booster
Its a LY6 with a Comp cam 227,235 duration with .614,.625 lift
Edelbrock Victor Jr
850 Race Demon
CTVS oil pan
VVT elinimated
Turbo 400/brake and Precision Industry 4800 convertor
3.90 gear
Looking to get into the 10'

BLWN1

iTrader: (6)

New style mount? Pretty sweet..

mike m

iTrader: (6)

What headers are you planning on running ?

dmracing

iTrader: (78)

Brp 1 7/8 into 2 inch step

dmracing

iTrader: (78)

Heres some from underneath

Tunink

iTrader: (3)

Mine did the same. We just took the booster off.

93hatch

iTrader: (9)

which valley cover is that to not have knock sensor holes?

dmracing

iTrader: (78)

Its a 2008 LY6 engine. The knock sensors are on the side of the engine block

93hatch

iTrader: (9)

ahhh Ill have to find me one thanks

dudek

looks good!
im doing a very similar build and dont live to far from you

dmracing

iTrader: (78)

Put the transmission and passenger header in.
1 7/8 to 2 inch step header

dmracing

iTrader: (78)

Some more pics

93hatch

iTrader: (9)

how small of a cowl hood do you think youll be able to pull off?

dmracing

iTrader: (78)

2 inch cowl aluminum hood

dmracing

iTrader: (78)

Heres a few more, you can kind of see road clearance. My car also has lowering springs
The camera is actually sitting on the ground.

martinez289

which intake did you use?

dmracing

iTrader: (78)

Edelbrock 28457 Victor Junior

dudek

anymore updates?

speedtigger

iTrader: (16)

That car should be well into the 10s no problem. Looks like fun.

dmracing

iTrader: (78)

Been busy working and house renovations. But here are a few update pics. Not a lot done. Gonna get back on track.
Changed the springs. These are From Brian Tooley and are a great quality spring kit.