Carbureted LSX Forum Carburetors | Carbed Intakes | Carb Tuning Tips for LSX Enthusiasts

Fuel Line Question

Old 06-21-2012, 09:35 PM
  #1  
TECH Enthusiast
Thread Starter
iTrader: (1)
 
SS125's Avatar
 
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes on 0 Posts

Default Fuel Line Question

I've run a fuel line from the fuel pump in the trunk under the car. I didn't want to run up beside the headers because they are going to be real close to the frame and real hot. So I ran the fuel line through a hole in front of the subframe connectors that went thru to the fenderwell. Here is a picture . The other line you see coming down from the left comes down from the carb, is clamped to the motor plate, comes down to the kframe and will attach to that blue an fitting. Will this be okay, or will the tracks have a problem with the way its mounted.

Here is a pic of the line coming down thru the kframe.

Here is a pic of the line coming down from the carb clamped to the motor plate.

Here is a pic of where the fuel line runs from the regulator down behind the motor plate.

I guess my question is will this pass tech inspection?

Last edited by SS125; 06-22-2012 at 10:20 AM.
Old 06-22-2012, 02:26 PM
  #2  
TECH Enthusiast
Thread Starter
iTrader: (1)
 
SS125's Avatar
 
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes on 0 Posts

Default

Nobody has an opinion on this?
Old 06-26-2012, 01:48 PM
  #3  
TECH Addict
iTrader: (15)
 
wildcamaro's Avatar
 
Join Date: Nov 2009
Location: Western PA
Posts: 2,501
Likes: 0
Received 3 Likes on 3 Posts

Default

Tech mandates that you can no more than 4 inches of rubber line so I think you're cool man...


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:00 PM.