Doug G

Where's your MSD box ???

Post pics if you can

jgillen91

iTrader: (1)

Cut harness abd shortened it so it had less excess

ZONES89RS

iTrader: (25)

Idk, lost it...

Prorac1

iTrader: (4)

Ba Ha ha ha, thats funny right there, lol. Mine is mounted in the glove box/mission control center in my Valiant. I dont have any pics, but if nescessary, I can get some of the panel I made to fit in my glove box. Eric L

The stunningman

iTrader: (47)

On firewall, under dash. I also have a the cord already mounted and ran into glove box with the usb adapter for easy access at the track.

Doug G

Thanks all.... still trying to decide.

ZONES89RS

iTrader: (25)

Had one on my intake in front of the Vic jr and another sitting on the HVAC box.

Pop N Wood

iTrader: (1)

Mounted it on the right fender up near the radiator. There is a pic in my album.

Doug G

Cool....thanks.

speedtigger

iTrader: (16)

Here is mine:

S10xGN

iTrader: (11)

Mine's on a pullout under the dash which also has all my fuses, flashers, etc.

3pedals

iTrader: (3)

mine is on the firewall as well, just above the heater box

wildcamaro

iTrader: (15)

On the intake...nice and lazy lol

If running a performer intake you must use at least a 3/4" spacer if you are runnIng a dual inlet Holley carb

Doug G

Thanks again....

I think it looks like on the firewall where the 6AL was....doesn't look too outta place as a lot mount them (all MSD box styles) in that area anyway.
If the wire harness was about 6" or so longer I could tuck in up where the battery used to be

speedtigger

iTrader: (16)

I have actually thought about painting the housing on mine black so it matches better.

Doug G

Maybe check yard sales or the dollar store or ????? and buy a rectangle plastic bowl....paint it....install it temporarily to see if you like first ?

Polynikes

iTrader: (9)

Mounted mine where the ashtray used to be.

camarof41_383

iTrader: (7)

I put mine under the dash.

Slick68

iTrader: (7)

Behind my glovebox.

GC99TA

iTrader: (30)

I mounted mine upright on the firewall, behind the inner fender and under the fender itself.



It's nice and tucked away. I have the cable routed through the firewall, under the dash, and its coiled up inside my ashtray for easy access.