first start ez efi 2.0 vids working
#1
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jan 2011
Location: north dakota
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
first start ez efi 2.0 vids working
It was only 11 above and my dash is stripped in prep for the cage so dont mind all the wires everywhere! Also the 8.8 rear end is in the process of being bolted in but I ordered the wrong backspace for the rear wheels so I put the rear on hold until the wheels come in later this week.
now I know its not a carb but you guys are my group and im not goin anywhere (unless im told to go). Lol please dont make me leave
This clip was during the first start about 4 or 5 minutes after it got running. It literally fired right up after I adjusted the throttle to about 1% on the tps so it could get some air. Im waitin on more parts and the cage before I finish the wiring.
I was kind of in panic mode due to no fan wired up at the time so dont mind the shaking. It runs way cleaber and fired up with just a bump of the start button. Well enough rambling on to the video!
here is a idle vid with the carb. It sounds different between the two I think
now I know its not a carb but you guys are my group and im not goin anywhere (unless im told to go). Lol please dont make me leave
This clip was during the first start about 4 or 5 minutes after it got running. It literally fired right up after I adjusted the throttle to about 1% on the tps so it could get some air. Im waitin on more parts and the cage before I finish the wiring.
I was kind of in panic mode due to no fan wired up at the time so dont mind the shaking. It runs way cleaber and fired up with just a bump of the start button. Well enough rambling on to the video!
here is a idle vid with the carb. It sounds different between the two I think
Last edited by 89gmcs15; 03-24-2014 at 05:42 PM.
Trending Topics
#9
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jan 2011
Location: north dakota
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for the support on this. It was really expensive to switch and I heard horror stories about it being hit and miss for working but just the fire up and revs this thing seems to be working. If anyone can view the link and embed the video please do so, this pos galaxy s4 ticks me off....
thanks again! Next video will be a driving one I hope!
thanks again! Next video will be a driving one I hope!
#16
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jan 2011
Location: north dakota
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
One issue with my handheld is the touch screen is saying my finger is about 3/8 inch left from where it is. Makes it a pain for selecting things but hopefully they can get that fixed. I dont like paying for halfassed stuff...
zone, the rear is gettin bolted in right when the weather warms up enough to be outside for extended times lol. Then get it to the cage builder and get it home for dash install and the kirkeys put in. Then all the little things on the list.... never ends. You guys think she will lift the front end at the track? 3000# race weight, th400 w/3200~ stall, 4.10 gears, 325/50/15 et streets?
#19
Sounds sweet. You got a lot of work ahead of you with those wires lol. I have ocd and I would be freakin out about it Thats why my crap takes so long to build. I cant get started sometimes if I feel like I cant get it done in a day