Camshaft for carbed 6.0 LQ9
#1
Teching In
Thread Starter
Join Date: Jun 2015
Location: Florida
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Camshaft for carbed 6.0 LQ9
Hello,
New guy to this forum looking for some advice on a camshaft.
Car-1969 Camaro, 12 bolt 3.73, trans 4l60E 2500 stall, stock 6.0 LQ9 carbed with 317 heads, may want to add a small shot of NOS in the future. Just going to have a nice street car, may go to the track occasionally. Any recommendations would be greatly appreciated. Thanks!
New guy to this forum looking for some advice on a camshaft.
Car-1969 Camaro, 12 bolt 3.73, trans 4l60E 2500 stall, stock 6.0 LQ9 carbed with 317 heads, may want to add a small shot of NOS in the future. Just going to have a nice street car, may go to the track occasionally. Any recommendations would be greatly appreciated. Thanks!
#2
In-Zane Moderator
iTrader: (25)
Martin at tick performance has some off shelf grinds that would work as well as offering custom grinds. Something in the low 220s intake and low 230s exhaust would probably be ideal on a 111 LSA with high .59x lift.
Would take advantage of the small
Converter and be well mannered as well as some thump.
Would take advantage of the small
Converter and be well mannered as well as some thump.
#4
Welcome aboard! You definitely want to call and get advice when it comes to a camshaft for a carbed LS. It can make a big difference just picking one out of a catalog vs getting one that is tailored to your specific setup.